Display Ipc Link - HP 6125G Command Reference Manual

Table 39 Command output
Field
ChannelID
Description

display ipc link

Syntax
display ipc link { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
node node-id: Displays the link status of the specified node, where node-id represents the number of the
specified node. The value is in the range of 0 to 4.
self-node: Displays the link status of the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipc link to display the link status of the specified node.
Examples
# Display link status information for the local node.
<Sysname> display ipc link self-node
Dst-NodeID
-------------------------------------------
1
2
The output shows that:
• An UP connection exists between the local node and node 1.
A DOWN connection exists between the local node and node 2.
•
Description
Channel number, which has been predefined and assigned by the
system. One channel number corresponds to one module. The display ipc
channel command displays the numbers of the current active modules.
Description information, which is generated by the internal software of
the device, is used to describe the functions of a channel. For example,
"FIB4" indicates that the channel is used for Layer 3 fast forwarding.
"Prehistorical channel, NO.2" indicates that no description is defined for
the channel, and the channel is the second channel established.
LinkStatus
UP
DOWN
177