Info-Center Syslog Channel - HP 6125G Command Reference Manual

Examples
# Enable synchronous information output, and then issue the display current-configuration command to
view the current configuration of the switch.
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] display current-
At this time, the system receives log information. It displays the log information first, and then displays
your previous input, which is display current- in this example.
%Jan 21 14:33:19:425 2011 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Sysname] display current-
Enter configuration to complete the display current-configuration command, and press Enter to execute
the command.
# Enable synchronous information output, and then save the current configuration (enter interactive
information).
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the log information. It displays the log information first and then displays
[Y/N].
%Jan 21 14:33:19:425 2011 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]:
Enter Y or N to complete your input.

info-center syslog channel

Syntax
info-center syslog channel { channel-number | channel-name }
undo info-center syslog channel
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number, in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to
configure a channel name, see info-center channel name.
Description
Use info-center syslog channel to configure the Web output channel. The system uses this channel to
output information to the Web interface.
Use undo info-center syslog channel to restore the default.
46