Vpn-Instance (Icmp Echo Operation View); Nqa Server Configuration Commands - HP 6125G Command Reference Manual

Description
Use username to configure a username used to log onto the FTP server.
Use undo username to remove the configured username.
By default, no username is configured for logging onto the FTP server.
Related commands: password and operation.
Examples
# Configure the login username as administrator.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] username administrator

vpn-instance (ICMP echo operation view)

Syntax
vpn-instance vpn-instance-name
undo vpn-instance
View
ICMP echo operation view
Default level
2: System level
Parameters
vpn-instance-name: Specifies the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Description
Use vpn-instance to apply the ICMP echo test group to the specified VPN.
Use undo vpn-instance to restore the default.
By default, the ICMP echo test group applies to the public network.
Examples
# Specify vpn1 as the MPLS L3VPN.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1

NQA server configuration commands

IMPORTANT:
You only need to configure the NQA server for UDP jitter, TCP, UDP echo and voice tests.
163