undo history-record number
View
Any NQA operation view
Default level
2: System level
Parameters
number: Specifies the maximum number of history records that can be saved in a test group. The value
is in the range of 0 to 50.
Description
Use history-record number to configure the maximum number of history records that can be saved in a
test group.
Use undo history-record number to restore the default.
By default, the maximum number of records that can be saved in a test group is 50.
If the number of history records in a test group exceeds the maximum number, the earliest history record
is removed.
Examples
# Configure the maximum number of history records that can be saved in a test group as 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record number 10
http-version
Syntax
http-version v1.0
undo http-version
View
HTTP operation view
Default level
2: System level
Parameters
v1.0: Uses HTTP version 1.0 in an HTTP test.
Description
Use http-version to configure the HTTP version used in an HTTP test.
Use undo http-version to restore the default.
By default, HTTP 1.0 is used in an HTTP test.
Examples
# Configure the HTTP version as 1.0 in an HTTP test.
<Sysname> system-view
133