Mode; Next-Hop - HP 6125G Command Reference Manual

[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] http-version v1.0

mode

Syntax
mode { active | passive }
undo mode
View
FTP operation view
Default level
2: System level
Parameters
active: Sets the data transmission mode to active for FTP tests. In this mode, the FTP server initiates a data
connection request.
passive: Sets the data transmission mode to passive for FTP tests. In this mode, a client initiates a data
connection request.
Description
Use mode to set the data transmission mode for FTP tests.
Use undo mode to restore the default.
By default, the data transmission mode is active.
Examples
# Set the data transmission mode to passive for FTP tests.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] mode passive

next-hop

Syntax
next-hop ip-address
undo next-hop
View
ICMP echo operation view
Default level
2: System level
Parameters
ip-address: Specifies the IP address of the next hop.
134