Sflow Counter Collector; Sflow Flow Collector - HP 6125G Command Reference Manual

sflow counter collector

Syntax
sflow counter collector collector-id
undo sflow counter collector
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
collector-id: Specifies the ID of the sFlow collector.
Description
Use sflow counter collector to specify the sFlow collector for counter sampling.
Use undo sflow counter collector to remove the sFlow collector for counter sampling.
By default, no sFlow collector is specified for counter sampling.
This command is supported only on physical Ethernet interfaces, but not on logical interfaces (such as
VLAN interfaces).
Examples
# Specify sFlow collector 2 on gigabitethernet 1/0/1 for counter sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] sflow counter collector 2

sflow flow collector

Syntax
sflow flow collector collector-id
undo sflow flow collector
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
collector-id: Specifies the ID of the sFlow collector.
Description
Use sflow flow collector to specify the sFlow collector for flow sampling.
Use undo sflow flow collector to remove the sFlow collector configured for flow sampling.
By default, no sFlow collector is specified for flow sampling.
172