Display Snmp-Agent Local-Engineid - HP 6125G Command Reference Manual

Description
Use display snmp-agent group to display information about an SNMP group, including the group name,
security model, MIB view, and storage type. If no group is specified, the command displays information
about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Table 16 Command output
Field
Group name
Security model
Readview
Writeview
Notifyview
Storage-type

display snmp-agent local-engineid

Syntax
display snmp-agent local-engineid [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
Description
SNMP group name.
Security model of the SNMP group:
•
authPriv—authentication with privacy.
•
authNoPriv—authentication without privacy.
•
noAuthNoPriv—no authentication, no privacy.
For an SNMPv1 or SNMPv2c group, the security model can be only
noAuthNoPriv.
Read only MIB view accessible to the SNMP group.
Writable MIB view associated with the SNMP group.
Notify MIB view for the SNMP group. The SNMP users in the group
can send traps only for the nodes in the notify MIB view.
Storage type, including volatile, nonVolatile, permanent, readOnly,
and other (see Table 15).
56