Monitor-Port - HP 6125G Command Reference Manual

monitor-port

Syntax
[ mirroring-group group-id ] monitor-port
undo [ mirroring-group group-id ] monitor-port
View
Interface view
Default level
2: System level
Parameters
mirroring-group group-id: Specifies a local or remote destination group by its number, which ranges
from 1 to 4 and defaults to 1. The mirroring group specified by group-id must already exist.
Description
Use monitor-port to assign the current port to a local or remote destination group as the monitor port.
Use undo monitor-port to remove the current port from the mirroring group.
By default, a port does not serve any mirroring group as the monitor port.
You cannot configure a monitor port for a remote source group.
You cannot configure a source port of an existing mirroring group as a monitor port.
Related commands: mirroring-group.
Examples
# Create local mirroring group 1, and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] monitor-port
# Create remote destination group 2, and configure GigabitEthernet 1/0/2 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination
[Sysname] interface GigabitEthernet 1/0/2
[Sysname-GigabitEthernet1/0/2] monitor-port
110