Data-Fill - HP 6125G Command Reference Manual

View
Voice operation view
Default level
2: System level
Parameters
g71 1a: Specifies a G.71 1 A-law codec type.
g71 1u: Specifies a G.71 1 μ-law codec type
g729a: Specifies a G.729 A-law codec type.
Description
Use codec-type to configure the codec type for a voice test.
Use undo codec-type to restore the default.
By default, the codec type for a voice test is G.71 1 A-law.
Examples
# Configure the codec type for a voice test as g729a.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] codec-type g729a

data-fill

Syntax
data-fill string
undo data-fill
View
ICMP echo, UDP echo, UDP jitter, voice operation view
Default level
2: System level
Parameters
string: Specifies a case-sensitive string of 1 to 200 characters.
Description
Use data-fill to configure the string to be filled in the data field of a probe packet.
Use undo data-fill to restore the default.
By default, the string is the hexadecimal number 00010203040506070809.
• If the data field length is smaller than the string length, only the first part of the string is filled. For
example, if you configure the string as abcd and the data field size as 3 bytes, abc is filled.
If the data field length is greater than the string length, the system fills the data field with the string
•
cyclically until the data field is full. For example, if you configure the string as abcd and the data
field size as 6 bytes, abcdab is filled.
113