Ntp-Service Broadcast-Client; Ntp-Service Broadcast-Server - HP 6125G Command Reference Manual

When the NTP authentication key is configured, configure the key as a trusted key by using the
ntp-service reliable authentication-keyid command.
Presently the system supports only the MD5 algorithm for key authentication.
A maximum of 1,024 keys can be set for each device.
If an NTP authentication key is specified as a trusted key, the key automatically changes to untrusted after
you delete the key. In this case, you do not need to execute the undo ntp-service reliable
authentication-keyid command.
Related commands: ntp-service reliable authentication-keyid.
Examples
# Set an MD5 authentication key, with the key ID of 10 and key value of BetterKey.
<Sysname> system-view
[Sysname] ntp-service authentication enable
[Sysname] ntp-service authentication-keyid 10 authentication-mode md5 BetterKey

ntp-service broadcast-client

Syntax
ntp-service broadcast-client
undo ntp-service broadcast-client
View
VLAN interface view
Default level
3: Manage level
Parameters
None
Description
Use ntp-service broadcast-client to configure the device to operate in NTP broadcast client mode and
use the current interface to receive NTP broadcast packets.
Use undo ntp-service broadcast-client to remove the configuration.
By default, the device does not operate in any NTP operation mode.
Examples
# Configure the device to operate in broadcast client mode and receive NTP broadcast messages on
VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ntp-service broadcast-client

ntp-service broadcast-server

Syntax
ntp-service broadcast-server [ authentication-keyid keyid | version number ] *
21