D Isplaying Snmp G Roups - HP ProCurve 9304M Security Manual

hexadecimal format for the des-password. If the "encryption" keyword is not used enter a password string. The
agent will generate a suitable 16-octet DES key from the password string.
Currently, DES is the only encryption type supported for priv password.
Displaying the Engine ID
To display the engine ID of a management module, enter a command such as the following:
ProCurveRS(config)# show snmp engineid
Local SNMP Engine ID: 800007c70300e05290ab60
Engine Boots: 3
Engine time: 5
Syntax: show snmp engineid
The engine ID identifies the source or destination of the packet.
The engine boots represents the number of times that the SNMP engine reinitialized itself with the same engine
ID. If the engineID is modified, the boot count is reset to 0.
The engine time represents the current time with the SNMP agent.
Displaying SNMP Groups
To display the definition of an SNMP group, enter a command such as the following:
ProCurveRS(config)# show snmp group
groupname = exceptifgrp
security model = v3
security level = authNoPriv
ACL id = 2
readview = exceptif
writeview = <none>
Syntax: show snmp group
The value for security level can be one of the following:
Security Level
<none>
noauthNoPriv
authNoPriv
June 2005
Authentication
If the security model shows v1 or v2, then security
level is blank. User names are not used to
authenticate users; community strings are used
instead.
Displays if the security model shows v3 and user
authentication is by user name only.
Displays if the security model shows v3 and user
authentication is by user name and the MD5 or SHA
algorithm.
Securing SNMP Access
10 - 9