Ping Ipv6 - HP 6125G Command Reference Manual

Network management and monitoring
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Field
Reply from 1.1.2.2 : bytes=56
Sequence=1 ttl=255 time=1 ms
Record Route:
--- 1.1.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0/4/20
ms

ping ipv6

Syntax
ping ipv6 [ -a source-ipv6 | -c count | -m interval | -s packet-size | -t timeout | -tos tos| -vpn-instance
vpn-instance-name ] * host [ -i interface-type interface-number ]
View
Any view
Default level
0: Visit level
Parameters
-a source-ipv6: Specifies the source IPv6 address of an ICMP echo request. It must be a legal IPv6
address configured on the device. If this option is not specified, the source IPv6 address of an ICMP echo
request is the address of the outbound interface of the request. The address selection rule is defined by
RFC 3484.
-c count: Specifies the number of times that an ICMPv6 echo request is sent, which is in the range of 1
to 4294967295 and defaults to 5.
-m interval: Specifies the interval (in milliseconds) to send an ICMPv6 echo reply, which is in the range
of 1 to 65535 and defaults to 200.
If a response from the destination is received within the timeout time, the interval to send the next
echo request equals the actual response period plus the value of interval.
If no response from the destination is received within the timeout time, the interval to send the next
echo request equals the timeout value plus the value of interval.
Description
Received the ICMP reply from the device whose IP address is 1.1.2.2. If
no reply is received during the timeout period, "Request time out" is
displayed.
bytes—Indicates the number of data bytes in the ICMP reply.
Sequence—Indicates the packet sequence, used to determine
whether a segment is lost, disordered or repeated.
ttl—Indicates the TTL value in the ICMP reply.
time—Indicates the response time.
Routers through which the ICMP echo request passed. They are
displayed in inversed order. The router with a smaller distance to the
destination is displayed first.
Statistics on data received and sent in the ping operation.
Number of ICMP echo requests sent.
Number of ICMP echo requests received.
Percentage of packets not responded to the total packets sent.
Minimum/average/maximum response time, in ms. The field is not
available for failed ping attempts in an IPv4 network. In an IPv6 network,
however, the field is available and set to 0/0/0 ms.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents