Terminal Trapping - HP 6125G Command Reference Manual

undo terminal monitor
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use terminal monitor to enable the monitoring of system information on the current terminal.
Use undo terminal monitor to disable the monitoring of system information on the current terminal.
By default, monitoring of the system information is enabled on the console and disabled on the current
terminal.
Configure the terminal monitor command before you can display the log, trap, and debugging
information.
The undo terminal monitor command automatically disables the monitoring of log, trap, and debugging
information.
The configuration of this command is only valid for the current connection between the terminal and the
switch. If a new connection is established, the monitoring of system information on the terminal restores
the default.
Examples
# Enable the monitoring of system information on the current terminal.
<Sysname> terminal monitor
Info: Current terminal monitor is on.

terminal trapping

Syntax
terminal trapping
undo terminal trapping
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use terminal trapping to enable the display of trap information on the current terminal.
Use undo terminal trapping to disable the display of trap information on the current terminal.
By default, the display of trap information is enabled on both the current terminal and the console.
52