Port-Security Max-Mac-Count - HP 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] port-security enable
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security max-mac-count 100
[Sysname-Ethernet1/0/1] port-security port-mode autolearn
[Sysname-Ethernet1/0/1] quit
[Sysname] port-security mac-address security 0001-0001-0002 interface ethernet 1/0/1 vlan
10
# Enable port security, set port Ethernet 1/0/1 in autoLearn mode, and add a static secure MAC
address 0001-0002-0003 in VLAN 4 in interface view.
<Sysname> system-view
[Sysname] port-security enable
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security max-mac-count 100
[Sysname-Ethernet1/0/1] port-security port-mode autolearn
[Sysname-Ethernet1/0/1] port-security mac-address security 0001-0002-0003 vlan 4

port-security max-mac-count

Syntax
port-security max-mac-count count-value
undo port-security max-mac-count
View
Ethernet interface view
Default level
2: System level
Parameters
count-value: Specifies the maximum number of MAC addresses that port security allows on the port. The
value is in the range of 1 to 1024.
Description
Use the port-security max-mac-count command to set the maximum number of MAC addresses that port
security allows on a port.
Use the undo port-security max-mac-count command to restore the default setting.
By default, port security has no limit on the number of MAC addresses on a port.
In autoLearn mode, this command sets the maximum number of secure MAC addresses (both configured
and automatically learned) on the port.
In any other mode that enables 802.1X, MAC authentication, or both, this command sets the maximum
number of authenticated MAC addresses on the port. The actual maximum number of concurrent users
that the port accepts equals this limit or the authentication method's limit on the number of concurrent
users, whichever is smaller. For example, in userLoginSecureExt mode, if 802.1X allows less concurrent
users than port security's limit on the number of MAC addresses, port security's limit takes effect.
You cannot change port security's limit on the number of MAC addresses when the port is operating in
autoLearn mode.
179