Nqa Schedule - HP 6125XLG Command Reference Manual

Default
The NQA client is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable
Related commands
nqa server enable

nqa schedule

Use nqa schedule to configure the scheduling parameters for an NQA operation.
Use undo nqa schedule to stop the operation.
Syntax
nqa schedule admin-name operation-tag start-time { hh:mm:ss [ yyyy/mm/dd | mm/dd/yyyy ] | now }
lifetime { lifetime | forever } [ recurring ]
undo nqa schedule admin-name operation-tag
Default
No schedule is configured for an NQA operation.
Views
System view
Predefined user roles
network-admin
Parameters
admin-name: Specifies the name of the administrator who creates the NQA operation, a case-insensitive
string of 1 to 32 characters excluding hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters excluding
hyphens (-).
start-time: Specifies the start time and date of the NQA operation.
hh:mm:ss: Specifies the start time of an NQA operation.
yyyy/mm/dd: Specifies the start date of an NQA operation. The default value is the current system time,
and the value for yyyy is in the range of 2000 to 2035.
mm/dd/yyyy: Specifies the start date of an NQA operation. The default value is the current system time,
and the value for yyyy is in the range of 2000 to 2035.
now: Starts the operation immediately.
128