Task
Associating the track module
with a detection module
Associating the track module
with an application module
Associating the track module with a detection
module
Associating track with NQA
NQA supports multiple test types to analyze network performance, services, service quality. For
example, an NQA test group can periodically detect whether a destination is reachable, or whether the
TCP connection to a TCP server can be set up.
An NQA test group functions as follows when it is associated with a track entry:
If the consecutive failures reach the specified threshold, the NQA module tells the track module that
•
the tracked object malfunctions. Then the track module sets the track entry to the Negative state.
If the specified threshold is not reached, the NQA module tells the track module that the tracked
•
object functions normally. The track module then sets the track entry to the Positive state.
For more information about NQA, see Network Management and Monitoring Configuration Guide.
To associate track with NQA:
To do...
•
Enter system view
•
Create a track entry,
associate it with an NQA
reaction entry, and specify the
delay time for the track
module to notify the
associated application
module when the track entry
status changes
If the specified NQA test group or the reaction entry in the track entry does not exist, the status of the
track entry is Invalid.
Associating track with BFD
BFD supports the control packet mode and echo mode. Only echo-mode BFD can be associated with a
track entry.
The BFD functions as follows when it is associated with a track entry:
Associating track with NQA
Associating track with BFD
Associating track with interface management
Associating track with VRRP
Associating track with static routing
Associating track with PBR
Use the command...
system-view
track track-entry-number nqa entry
admin-name operation-tag
reaction item-number [ delay {
negative negative-time | positive
positive-time } * ]
162
Remarks
Required
Use any of the
approaches
Required
Use any of the
approaches
Remarks
—
Required
No track entry is created by
default