About Printer Menu - Oce Arizona T220 User Manual

Océ | User Interface
10. Press ACCEPT. You then see:
11. Use the +/- buttons to enter the correct hour and minute, in 24-hour
12. Press ACCEPT or MENU. You then see:
ABOUT PRINTER
Displays amount of media printed, firmware revision, firmware build date,
firmware build time, serial number, and boot ROM version.
The About Printer menu enables you to view the current printer specifications
through the printer control panel. Record this data for future use in case a
configuration print was not run at installation or in case this submenu is not
available due to an outage.
Follow these steps to view the About Printer menu:
2-24
9. Press MENU. You then see:
SET CLOCK
set time
SET TIME
hh : mm
format.
SET CLOCK
set time
Figure 9 About Printer Menu
1. Press the MENU button two times at the online screen.
2. Press the ACCEPT button at MAIN MENU operator. You then see:
OPERATOR
maintenance
3. Press MENU until you reach OPERATOR about printer, and press
ACCEPT. You then see:
ABOUT PRINTER
Printed: XXXXX'
3010100686-B