Maintenance; How To Remove - Oce Arizona 400 Series GT User Manual

How to Change a UV Lamp Bulb
Remove the foam filter from the top of the housing by lifting the exposed edge as shown
3.
below. It is flexible and will bend as you remove it.
[176] Remove Lamp Filter
Swing the UV lamp housing interlock safety arm out of the way:
4.
[177] Interlock Safety Arm
• first lift it straight up to the height of the blue connector;
• then angle it away from the connector as you raise it higher; and
• finally swing the arm back over the connector and past the raised part of the lamp
housing.
Note:
The UV lamp housing cannot be removed from the carriage until the bracket is swung
out of the way.
Lift the UV lamp housing straight up and out of its carriage bucket.
5.
How to Remove the UV Lamp Bulb
Attention:
Use cotton gloves when handling the UV lamp and Shutter assemblies; oil from fingers
can harm these components and shorten lamp life.
252 Chapter 12 - Printer Maintenance