Caution:
The underside of the UV lamps may be hot, avoid touching them.
How to Clean the Carriage Underside
Slide the maintenance station drawer out from under the carriage.
1.
Press the middle switch to raise the carriage to its maximum height.
2.
Prepare a clean poly wipe cloth as shown below.
3.
[152] Prepare a poly wipe cloth
Attention:
In the next step, make sure that you do not touch the nozzles of the printheads. If you
happen to touch one with the cloth, you must perform printhead maintenance. Note
that contact with a printhead by any object other than the suction-head used for mainte-
nance can cause damage to the nozzles and result in poor image quality or possibly require
a printhead replacement.
Slide the cloth along the metal plate between the first two printheads to remove any ink
4.
that has accumulated.
Clean Carriage Underside
Chapter 12 - Printer Maintenance
215