Oce Arizona 400 Series GT User Manual page 30

Safety Awareness
Avoid these Situations For Your Personal Safety
[24] Do not push gantry
[25] Hot UV Lamps
30 Chapter 3 - Safety Information
Do not push or force
the gantry to move
manually if it is al-
ready in motion. If
you do move the
gantry, a Motion Er-
ror message will dis-
play and you will have
to use the mouse to
click Reset on the user
interface LCD dis-
play.
When the Mainte-
nance Station is open
to perform printhead
maintenance, do not
touch the UV lamp
assembly as it can be
hot. Also be aware
that the carriage will
move up or down
when the Raise Car-
riage switch is pushed.