Oce Arizona 400 Series GT User Manual page 135

How to Use Media Edge Protectors
Press down on the tape to fasten the protector in this position.
7.
[93] Edge Protector in Position
Note:
The adhesive on the edge protector can be re-used approximately ten times. If you find
that it is not holding the protector in place, then use a new one.
Result
The media edge protectors will reduce the amount of fiber and other debris. However,
it is important to keep the platen and cutting guide areas clean as indicated in the Roll
Media maintenance section.
How to Deal with Wide Media
If you use media of the maximum width for the RMO (2.2m or 7.2 feet) that requires
media edge protection, you can cut the protectors in half in order for them to fit.
Chapter 7 - How to Operate the Roll Media Option 135