Oce Arizona 400 Series GT User Manual page 56

Print Job Control Module
result, it may be necessary to print some output in Production Smooth Mode or
Quality Mode.
Note: When Production Smooth or Squared mode is used, there is a pull-down menu
in the Print Job module that allows you to select either Production-Smooth or Produc-
tion-Layered (the menu allows you to change how it was configured in your ONYX
software).
• Quality provides excellent image quality and is suitable for a wide range of image
types and looks good with most media.
• Quality-Density doubles the density for backlit media. For flatbed media that may
warp or move slightly from the heat of the lamps, this mode provides better image
registration than Overprint because it is done in one gantry pass.
• Quality-Layered allows you to place multiple layers in one print job. It is most useful
when printing with White Ink (see Chapter 9 How to Work with White Ink and
Varnish). You must configure any extra layers in the ONYX software.
Note: When Quality Density or Layered mode is used, there is a pull-down menu in
the Print Job module that allows you to select either Quality-Layered or Quality-
Density (the menu allows you to change how it was configured in your ONYX soft-
ware).
• Fine Art is used when details are important and speed is not an issue. It is a good
choice if your image contains text or fine details and also solid colors.
• High Definition provides higher resolution with more detail than Fine Art, especially
with very small text or fine lines.
Note: The Varnish option is not available with this print mode. Varnish is available
with all other print modes, if you ordered the option with your printer.
10) Printer Interface Module Tabs
These tabs allow you to switch between different functional modules of the printer. Click
on a tab to display the screen associated with each of the modules available.
11) Software Version Number and Image Upload Progress
Displays the version of the currently installed printer software.
The image upload progress panel indicates the name of a job that is currently uploading
to the printer. This panel only displays information while an image is transferred from
the ProductionHouse computer.
56 Chapter 4 - How to Navigate the User Interface