How To Load Media - Oce Arizona 400 Series GT User Manual

How to Load Media

Introduction
This section explains how to load a new roll of media. It details the following actions that
are associated with loading media:
• A) Load Supply Media Roll On Media Shaft
• B) Load Take-up Empty Core On Media Shaft
• C) Loading the Media - Standard Method
• D) Loading the Media - Alternate Method
Media Feed Direction
Determine first whether you need the media roll to be print side out or in. "Print side
out" means that the media unrolls from the bottom of the supply shaft. "Print side in",
means that the media unrolls from the top of the shaft (see the diagram below). This allows
you to print on the "back" side of the media.
[75] Media Feed Direction
Chapter 7 - How to Operate the Roll Media Option
How to Load Media
113