Maintenance - Oce Arizona 400 Series GT User Manual

Fill the Coolant Reservoir
Illustration
[165] Coolant Bottle
Fill the Coolant Reservoir
Remove the coolant tube from the coolant bottle lid.
1.
Remove the coolant bottle from the ink bay.
2.
Remove the coolant bottle lid.
3.
Get the coolant fluid container that shipped with the printer (usually located behind the
4.
door to the left of the coolant bottle in the Primary Ink Bay).
Fill the coolant bottle.
5.
Attach the lid to coolant bottle and return it to the Primary ink bay.
6.
Store the coolant fluid until it is needed again.
7.
238 Chapter 12 - Printer Maintenance