Caution:
The UV lamps and the carriage guard may be hot if the printer has been active. Avoid
touching the guard and the lamp assembly until it is cool.
Caution:
These UV lamp bulbs contain mercury, and if they are broken the vapor is toxic if inhaled.
The lamp bulbs must be disposed of according to local environmental regulations.
How to Remove the Lamp Housing
Remove the carriage guard by lifting it straight up and then away from the carriage.
1.
Disconnect the UV lamp housing power cable connector by pressing in the two blue tabs
2.
on either side and pull it out.
[175] Disconnect power cable
How to Change a UV Lamp Bulb
Chapter 12 - Printer Maintenance
251