Oce Arizona 400 Series GT User Manual page 107

Roll Media Hardware
#
Component
1) Dual Foot Pedal
Switches
2) Media Drive Couplers
3) Accessory Holder
4) Take-up Media Shaft
5) Supply Media Shaft
6) Media Access Door
7) Media Cut Guide
8) Media Tension Bar
9) Vacuum Platen
10) Gimbal
11) Capstan
Function
The dual foot pedal switches areused to control media
feed in both forward and reverse directions. Function
varies depending on whether media is loaded or unloaded.
The couplers keep the media shafts in place and engaged
to the drive motor. In the open (horizontal) position they
allow the media shafts to be removed.
Convenient storage for tape, cutting blade and 5mm hex
key tool.
Supports the take-up media roll.
Supports the supply media roll.
Provides access to the supply media for media loading.
Allows easy cutting of the media.
Provides tension to ensure steady movement of the media.
Holds the roll media in place while an image is printed.
Maintains alignment of the media on the take-up shaft.
Determines the location of the media for printing and
provides steady movement of the media.
Note:
The capstan must always be clean and smooth.
Clean any kind of debris that might collect on it,
especially UV inks (See RMO Maintenance sec-
tion for cleaning instructions).
Chapter 7 - How to Operate the Roll Media Option
Roll Media Option Hardware
107