Oce Arizona 400 Series GT User Manual page 192

How to Create a Media for White Ink Print Jobs
Note:
If you use a strip device such as the Gretag-MacBeth EyeOne, you may get invalid readings
for the white data. To ensure that you get usable spot data points for each measurement,
you will need to use the data from the black channel. To do this, click on Setup in the
Print Swatch Dialog. In the Swatch Options tab, click select Spot 1 to substitute with
the black linearization information.
[148] Print Swatch
[149] Substitute White for Black
Once the swatch is dry, click > Read Swatch and Read Swatch again to open the calibration
2.
data table.
Follow the Strip letter and Patch number. If you have substituted the Black Channel for
3.
your white ink there are no additional steps necessary.
Click > OK to accept readings and click > Next to continue.
4.
Click > Build Linearization as usual. Note your Spot Channel curve is now represented
5.
bearing the same curve as black. Continue on to the Ink Limits step.
192 Chapter 9 - How to Work With White Ink and Varnish