Oce Arizona 400 Series GT User Manual page 32

Safety Awareness
Avoid these Situations For Your Personal Safety
[28] UV Lamp Hazard
Residual Safety Risks
Your Océ Arizona printer is engineered to minimize machine components and operating
procedures that may compromise operator safety. However, in order to maintain some
machine operations and functionality, certain compromises are required. The following
table documents some of these residual hazards. By making the operator aware of the
potential risks, we hope to ensure maximum safety in the operation of this printer.
Caution: there may be a time lag between when a print job is issued and when the gantry
movement actually begins as the UV lamps must warm up first. Movement can start
many minutes after a print job is sent.
32 Chapter 3 - Safety Information
Keep a distance of at
least 1 m (3 ft.) to the
UV light when print-
ing.
Avoid looking at the
UV lamps, especially
if you are seated at the
same level as the car-
riage. Do not sit
within 5 meters (17
feet) of the carriage
path.
Also do not touch the
UV lamp assembly or
the surrounding
guard as they will be
hot and may result in
burns of the skin.