Table of Contents
Advertisement
Perform daily maintenance
When to do
Perform the following maintenance tasks on a daily basis.
Before you begin
Start up the print system (See
Procedure
1. Clean the wiper roller compartments (See
2. Print cleaning sheets. When the printed sheets are too dirty, repeat the Print cleaning sheets
procedure (See
3. When the printed sheets have ink pollution on the back of the media, as illustrated in
(lines) on the back of the media on page 276
on page
277, repeat the Clean the wiper roller compartments procedure and the Clean the print
surface and the vacuum holes procedure (see
Clean the print surface and the vacuum holes on page
4. Check if the media output section of the printer shows clearly visible pollution. If yes, clean it (See
Clean the media output section of the printer on page
5. When you use a stacker check if the media input section of the stacker shows clearly visible
pollution. If yes, clean it (see
6. When you use a folding device check if the media input section of the folding device shows
clearly visible pollution. If yes, clean it (see
page
218).
Switch on and start up on page
Print cleaning sheets on page
Clean the media input section of the stacker on page
44).
Clean wiper roller compartments on page
178).
or
Ink pollution (droplets) on the back of the media
Clean wiper roller compartments on page 196
203).
214).
Clean the media input section of the folding device on
Chapter 9 - Maintain the print system
Perform daily maintenance
196).
Ink pollution
and
216).
177
Advertisement
Table of Contents
