Oce Arizona 400 Series GT User Manual page 182

How to Create a Media for White Ink Print Jobs
is on how to create the media. The media is essential to white ink workflow, and the rest
of the media model creation simply ensures optimal image quality.
Note:
The term "media" can be confusing as it really has two meanings in the context of your
Onyx workflow. In general use it refers to a physical material that you can print on.
ProductionHouse uses the term media to refer to the definition of how a particular
material is used and included within a media model that you define and then use when
you open a print job.
Before you begin
Before you create a new media you must set up your printer to enable white ink configu-
rations in Onyx Media Manager.
In the RIP-Queue, highlight your printer and click > Media Manager.
1.
Click > Configure Devices > Configure Printer Capabilities and enable the white ink
2.
configurations (CMYKW) from the ink configuration menu.
[136] Configure Printer
Your printer is now enabled with an ink configuration that supports white ink. You only
have to set this up one time unless you add a new printer to ProductionHouse.
182 Chapter 9 - How to Work With White Ink and Varnish