Oce Arizona 400 Series GT User Manual page 193

Set Ink Limits
To print the Ink Limits swatch:
Click > Print Swatch and determine Ink Limits as usual. Look for bleed in the columns
1.
and choose a value where you can eliminate waste ink.
Click> Read Swatch and enter in the values in the recommended Advanced tab.
2.
Click > Next to continue on to the ICC step.
3.
ICC
Spot colors are NOT used in ICC processing so continue as usual if you want to create
a profile. To print the ICC swatch:
Click > Print Swatch and select your color sampling device.
1.
Click > Setup > Options if you want to choose a larger number of swatches for profile
2.
accuracy, otherwise click > Print.
Click > Read Swatch and read in the ICC data.
3.
Click > Options to modify the settings, or click > Build to use the default build options.
4.
Create a test Print and click > Next to continue.
5.
Click > Finish.
6.
Result
This completes the media profiling workflow and you can now use this media in ONYX
ProductionHouse.
How to Use the Media You Created
Now that you have a media model with white ink, you may wish to edit and configure
this media with different layer options. Keep in mind that using one or two layers of
white will affect the output color rendering and overall density. It is suggested that separate
media models be created for one or two layer white ink usage. To make a copy and edit
a media:
Within Media Manager > View Media Library.
1.
Select the media and click > Copy and rename the media.
2.
Highlight the media and click > Edit.
3.
Conversely, to keep the size of the OMLs down you may want to select and copy the
print mode only rather than the entire media folder. This method requires that you bring
jobs into Preflight to change the print modes rather than simply choosing a different
How to Create a Media for White Ink Print Jobs
Chapter 9 - How to Work With White Ink and Varnish 193