Oce Arizona 400 Series GT User Manual page 43

Component
7) Vacuum Gauge
8) Print Button
9) Maintenance Station
10) Vacuum Zone
Control Handles
11) Ink Bay
12) Ink Filters
(13) Coolant Bottle
(14) Vacuum Table
Foot Switch
(15) Bulkhead access
door
Function
Displays the strength of the table vacuum system. If it reads
less than 10"Hg, check for vacuum leaks.
Starts the current print job.
Designated area for cleaning the printheads and the under-
side of the carriage.
Five vacuum zone control handles determine if vacuum
zones 2 to 6 on the printer table are active when the vacuum
pump is switched on. Zone 1 is always on so it has no
control handle. The zones on the Océ Arizona 400 Series
XT model are different (see Chapter 6 for details).
There are two ink bays: the Primary bay contains CMYK
ink and the coolant bottle; the Secondary bay holds the
optional light Cyan, Magenta, and White inks or Varnish.
Ink filters are behind a door under the ink bags. The filters
remove unwanted particulate matter from the ink.
Provides coolant to maintain correct temperature of the
ink in the printheads.
Toggles the pump to turn the table vacuum on/off. Vacuum
must be on prior to starting a print.
Provides access to the connections required to plug in the
podium components such as LCD monitor, mouse, and
E-stop. Also is a storage location for the coolant supply
bottle.
Chapter 4 - How to Navigate the User Interface
Operator Interface Hardware
43