Oce Arizona 400 Series GT User Manual page 76

How to Power the Printer On and Off
24 to 72 hours
3 to 14 days
Longer than 14 days
How to Lock Out the Power Switch
Attention:
Some service procedures require locking out the On/Off switch to ensure operator safety.
When the switch is locked out, it is impossible to supply power to the printer.
Refer to the Shutdown procedure "How to Power Off", at the beginning of this section.
1.
Turn the AC power switch to the Off position.
2.
Apply a lock and a tag-out label to the Lock-out area of the switch for the duration of
3.
any service or maintenance procedures.
Perform service procedure (generally this is done by a service technician)
4.
When maintenance or service is complete, remove the lock and tag-out label and turn
5.
the AC power switch to the On position.
76 Chapter 5 - How to Operate Your Océ Arizona Printer
• Turn off lamps
• Perform printhead maintenance when the ink temperature
is at least 40° Centigrade (104° Fahrenheit)
• Swab print heads
• Turn off ink heater
•
If the Automatic printer warm-up was set in Printer Set-
tings, turn it off
• Turn off lamps
• Perform printhead maintenance when the ink temperature
is at least 40° Centigrade (104° Fahrenheit)
• Swab printheads
• Turn off ink heater
• If the Automatic printer warm-up was set in Printer Set-
tings, turn it off
• Remove or rewind any media from the RMO
•
Contact your local service representative if you need to
prepare the printer for longer term storage