Oce Arizona 400 Series GT User Manual page 128

How to Print on Roll Media
Click on the Roll Manager icon to enter the Roll Media Manager dialog window.
3.
[88] Roll media manager
Enter the Media width for the roll media that you have loaded.
4.
Note:
If the media width entered is less than 1067 mm (3.5 ft) the standard nozzle check will
not fit across the media. In this case, if the Nozzle Check icon is selected from the Print
Job Control command toolbar, the narrow version of the nozzle check (Nozzle Check
Narrow) is automatically added to the print queue.
Nozzle Check print: 1067 x 107.5 (3.5 x 0.35 ft)
Nozzle Check Narrow: 886.5 x 214.7 (2.9 x 0.70 ft)
Check that the rest of the media parameters displayed match the particular media you
5.
loaded.
You can create a new media or edit an existing one by changing the parameter values and
6.
then saving them under a new media name. When you create a new media it takes the
current values as default and automatically creates a unique media name based on the
existing name.
128 Chapter 7 - How to Operate the Roll Media Option