Oce Arizona 400 Series GT User Manual page 129

Note:
Any changed parameter in the dialog window will be applied to the next roll media print
job, even if the change was not saved. This allows temporary changes to the parameters
without the need to save that media.
[89] Roll Media Manager Keyboard
Note:
There is always at least one media in the list that is called Default Media. It cannot be
deleted, but you can change its parameters if you want to use it. If you choose to delete
it, the parameters will go back to its original values, but the item will still appear in the
list.
Select the Media Tension
7.
Select the Media Advance Correction Factor
8.
Note:
Leave it at 50 unless you see light or dark lines of banding in the printed image (refer to
the next section "How to Set the Media Advance Correction Factor for more details).
When the displayed media values are correctly matched to the loaded media, click Close
9.
to exit the Media Manager.
Click on the Roll icon in the menu bar of the Job Control module to activate the RMO
10.
print queue (the icon will change from yellow to green).
Chapter 7 - How to Operate the Roll Media Option
How to Print on Roll Media
129