Oce Arizona 400 Series GT User Manual page 46

Printer Interface Software
Operator Interface Module Tabs
#
[46] Interface Tabs
Interface Modules
Component
Print Job Control
(Print tab)
Periodic Mainte-
nance
Printer Counters
(Counters Tab)
Printer Settings
(Settings tab)
Service and Diag-
nostics
Tools and Utilities
(Tools and Utilities
tab)
Software Upgrade
(Upgrade tab)
46 Chapter 4 - How to Navigate the User Interface
#
Function
Provides management of all aspects of working with print jobs.
It also controls some features of the printer and provides access
to Roll Media print controls (if that option is installed).
Displays maintenance tasks you must perform and indicates
when to do them. After you perform each task, the printer will
record that and then calculate when the task must be performed
again. At that time you will be reminded that the particular
maintenance task is due.
Provides information about the amount of ink consumed, the
amount of media printed and the number of print jobs started.
Also provides counters for the UV lamp bulbs use.
Displays information about, and also allows you to change
various aspects of the printer: Date and Time, Network Con-
nections, User Interface, Printer Settings, and Roll Media Set-
tings (if that option is installed).
This area is reserved for use by trained field service technicians
only.
Provides access to the Shutdown, Job Manager, Special prints,
Ink Flush Procedure, Spit Catcher Alignment, and Log files.
Allows you to update the printer to the latest version of the
printer software and firmware.