How To Install The Onyx Printer Driver - Oce Arizona 400 Series GT User Manual

How to Install the ONYX Printer Driver

How to Install the ONYX Printer Driver
Introduction
This section explains how to install and configure the ONYX ProductionHouse or
PosterShop installation files for the Océ Arizona 400 Series GT and Océ Arizona 400
Series XT printers.
Purpose
The printer installation file configures the ONYX software so that it knows how to
communicate with the Océ Arizona 400 Series GT. This prepares the printer so that the
operator can manage print jobs.
Before you begin
Make sure that the ONYX application software is installed before you install the printer
driver.
Note:
The ONYX Printer Installation Driver File can be installed as the final step in the instal-
lation of the ONYX ProductionHouse or PostShop software application or it can be
downloaded separately and installed later. However, it must be available for the software
to communicate with the printer.
Installation Procedure
Power on the printer.
1.
Select the Setup tab in the printer software to access the printer's network name.
2.
Verify that there is an Ethernet network connection between the ONYX host computer
3.
and the printer. To do this click on the Windows Start button the select My Computer,
My Network Places and ensure that the network name for the Océ Arizona 400 Series
GT is on the list.
Install the Printer Installation File on the ONYX host computer (if you have not already
4.
done this during the installation of the software). To install, click Start, All Programs,
then ProductionHouse or PosterShop and select Add Printer.
Select the media to be installed and continue with the installation.
5.
78 Chapter 5 - How to Operate Your Océ Arizona Printer