Save/Recall; Saving Files Via The Web Interface - Agilent Technologies InfiniiVision 3000 X-Series User Manual

Information about controlling the oscilloscope through remote commands
is contained in the Programmer's Guide, which is included on the
documentation CD supplied with this oscilloscope. You can also access this
document on the Agilent web site.
For more information about connecting to the oscilloscope, refer to the
Agilent Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a
printable electronic copy of the Connectivity Guide, direct your Web
browser to

Save/Recall

You can save setup files, screen images, waveform data files, or mask files
to your PC via the oscilloscope's web interface (see
Web Interface"
You can recall setup files, reference waveform data files, or mask files
from your PC via the oscilloscope's web interface (see
the Web Interface"

Saving Files via the Web Interface

To save setup files, screen images, waveform data, Lister data, or mask
files to your PC via the oscilloscope's web interface:
1 Access the oscilloscope's web interface (see
2 When the oscilloscope's web interface is displayed, select the Save/Recall
3 Click the Save link.
4 On the Save page:
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"www.agilent.com"
on page 323).
on page 324).
Interface" on page 316).
tab from the left side of the Welcome screen.
a Enter the name of the file you are saving to.
b Select the format.
and search for "Connectivity Guide".
"Accessing the Web
Web Interface
"Saving Files via the
"Recalling Files via
21
323