To Recall Setup Files; To Recall Mask Files - Agilent Technologies InfiniiVision 3000 X-Series User Manual

18
Save/Recall (Setups, Screens, Data)
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select
You can also recall setups and mask files by loading them using the File
Explorer. See
You can also configure the [Quick Action] key to recall setups, masks, or
reference waveforms. See
page 311.

To recall setup files

Setup files can be recalled from one of 10 internal (\Agilent Flash)
locations or from an external USB storage device.
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Press to Recall softkey.
4 If you would like to clear the display, press Clear Display.

To recall mask files

Mask files can be recalled from one of four internal (\Agilent Flash)
locations or from an external USB storage device.
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select
284
the type of file you want to recall:
Setup (*.scp) — See
•
Mask (*.msk) — See
•
Reference Waveform data (*.h5) — See
•
from a USB storage device"
Arbitrary Waveform data (*.csv) — See
•
page 285.
"File Explorer"
Setup (*.scp).
navigate to the file to recall. See
page 282.
A message indicating whether the recall was successful is displayed.
Mask (*.msk).
"To recall setup files"
"To recall mask files"
"To recall reference waveform files
on page 285.
"To recall arbitrary waveforms"
on page 299.
"Configuring the [Quick Action] Key"
"To navigate storage locations"
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
on page 284.
on page 284.
on
on
on