Agilent Technologies InfiniiVision 3000 X-Series User Manual page 406

26
I2S Triggering and Serial Decode
2 In the Search Menu, press the Search softkey; then, turn the Entry knob
3 In the Search Menu, press Search; then, select from these options:
For more information on searching data, see
page 128.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base"
406
to select the serial slot (Serial 1 or Serial 2) on which the I2S signals
are being decoded.
= (Equal) — finds the specified audio channel's data word when it
•
equals the specified word.
!= (Not Equal) — finds any word other than the specified word.
•
< (Less than) — finds when the channel's data word is less than the
•
specified value.
> (Greater than) — finds when the channel's data word is greater than
•
the specified value.
>< (In Range) — enter upper and lower values to specify the range to
•
find.
<> (Out of Range) — enter upper and lower values to specify range not
•
to find.
Errors — finds all errors.
•
on page 60.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"Searching Lister Data" on