Capturing Other Waveforms To The Arbitrary Waveform - Agilent Technologies InfiniiVision 3000 X-Series User Manual

17
Waveform Generator
To specify the voltage values of points:
1 Press Point #; then, use the Entry knob to select the point whose voltage
2 Press Voltage; then, use the Entry knob to set the point's voltage value.
To insert a point:
1 Press Point #; then, use the Entry knob to select the point after which
2 Press Insert Point.
To remove a point:
1 Press Point #; then, use the Entry knob to select the point you want to
2 Press Remove Point.
The Transparent softkey enables or disables transparent backgrounds. When
enabled, you can view underlying waveforms. When disabled, the
background is shaded.

Capturing Other Waveforms to the Arbitrary Waveform

The Edit Waveform Menu is opened by pressing Edit Waveform in the main
Waveform Generator Menu.
To capture another waveform to the arbitrary waveform:
1 Press Source; then, use the Entry knob to select the analog channel,
2 Press Store Source to Arb.
266
value you wish to set.
the new point will be inserted.
All points are adjusted to maintain uniform time spacing between
points.
remove.
All points are adjusted to maintain uniform time spacing between
points.
math, or reference location whose waveform you wish to capture.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide