This chapter explains oscilloscope utility functions.
I/O Interface Settings
The oscilloscope can be accessed and/or controlled remotely via these I/O
interfaces:
• USB device port on the rear panel (square shaped USB port).
• LAN interface when a LAN/VGA module is installed in the rear panel
• GPIB interface when a GPIB module is installed in the rear panel
To configure the I/O interfaces:
1 On the oscilloscope's front panel, press [Utility].
2 In the Utility Menu, press I/O.
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
20
Utility Settings
I/O Interface Settings
Setting up the Oscilloscope's LAN Connection
File Explorer
Setting Oscilloscope Preferences
Setting the Oscilloscope's Clock
Setting the Rear Panel TRIG OUT Source
Performing Service Tasks
Configuring the [Quick Action] Key
Adding an Annotation
module slot.
module slot.
295
299
301
304
305
312
s1
296
304
311
295