To Save Lister Data Files - Agilent Technologies InfiniiVision 3000 X-Series User Manual

18
Save/Recall (Setups, Screens, Data)
• Whether reference waveforms are on. Displayed reference waveforms
• Whether digital channels are on. Displayed digital channels consume
• Whether segmented memory is on. Acquisition memory is divided by
• The horizontal time/div (sweep speed) setting. At faster settings, fewer
• When saving to a CSV format file, the maximum number of data points
When necessary, the Length control performs a "1 of n" decimation of the
data . For example: if the Length is set to 1000, and you are displaying a
record that is 5000 data points in length, four of each five data points will
be decimated, creating an output file 1000 data points in length.
When saving waveform data, the save times depend on the chosen format:
Data File Format
BIN
ASCII XY
CSV
See Also
•
•
•

To save Lister data files

Lister data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
280
consume acquisition memory.
acquisition memory.
the number of segments.
data points appear on the display.
is 64K.
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
Lister data file.
navigate to the save location. See
page 282.
Save Times
fastest
medium
slowest
on page 342
on page 348
"To navigate storage locations"
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
on page 349
on