Real Scope Remote Front Panel - Agilent Technologies InfiniiVision 3000 X-Series User Manual

21
Web Interface
If Java is not installed on your PC, you will be prompted to install the Sun Microsystems
N O T E
Java Plug-in. This plug-in must be installed on the controlling PC for the web interface's
Remote Front Panel or Remote Programming operations.
The SCPI Command window is useful for testing commands or entering a
few commands interactively. When creating automated programs for
controlling the oscilloscope, you will typically use the Agilent IO Libraries
from within a programming environment like Microsoft Visual Studio (see
"Remote Programming with Agilent IO Libraries"

Real Scope Remote Front Panel

To operate the oscilloscope using the web interface's Real Scope Remote
Front Panel:
1 Access the oscilloscope's web interface (see
2 When the oscilloscope's web interface is displayed, select
3 Click keys or knobs that you would normally press on the oscilloscope's
318
Interface" on page 316).
Browser Web Control, then select Real Scope Remote Front Panel. After a few
seconds the Remote Front Panel appears.
front panel. Drag on edges of knobs to turn them.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
on page 322).
"Accessing the Web