You can also configure the [Quick Action] key to display the Snapshot All
popup. See
Voltage Measurements
The following figure shows the voltage measurement points.
Measurement units for each input channel can be set to Volts or Amps
using the channel Probe Units softkey. See
page 69.
The units of math waveforms are described in
Waveforms"
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"Configuring the [Quick Action] Key"
Maximum
Amplitude
on page 76.
"Peak- Peak"
on page 222
on page 311.
Top
Peak-Peak
Base
Minimum
"To specify the channel units"
"Units for Math
14
Measurements
on
221