Saving And Recalling Data; To Save And Recall Waveforms; Figure 48 [Save/Recall] Key - Agilent Technologies 1000B Series User Manual

5 Saving, Recalling, and Printing Data

Saving and Recalling Data

Using the oscilloscope's [Save/Recall] key, you can save and recall
oscilloscope waveforms and setups, and you can save oscilloscope display
screens and data.
Figure 48
When turning off the oscilloscope after saving or recalling data from an
external USB drive, allow at least five seconds for the data transfer to
complete.

To save and recall waveforms

You can save/recall oscilloscope waveforms and setups to/from 10 internal,
nonvolatile memory locations in the oscilloscope.
You can also save/recall waveforms and setups to an external USB drive
when it is connected to a rectangular USB host port.
1 Press [Save/Recall].
2 In the Storage menu, press Storage.
118
[Save/Recall] Key
Agilent 1000B Series Oscilloscopes User's Guide