Building A Mask File - Agilent Technologies InfiniiVision 3000 X-Series User Manual
Hide thumbs
Also See for InfiniiVision 3000 X-Series:
- Programmer's manual (1282 pages) ,
- User manual (424 pages) ,
- Service manual (162 pages)
Table of Contents
Advertisement
15
Mask Testing
The mask scaling controls how the normalized vectors are interpreted.
This in turn controls how the mask is drawn on the display. The remote
programming commands that control mask scaling are:
:MTES:SCAL:BIND 0
:MTES:SCAL:X1 -400.000E-06
:MTES:SCAL:XDEL +800.000E-06
:MTES:SCAL:Y1 +359.000E-03
:MTES:SCAL:Y2 +2.35900E+00
Building a Mask File
The following mask uses all eight mask regions. The most difficult part of
creating a mask file is normalizing the X and Y values from the time and
voltage values. This example shows an easy way to convert voltage and
time to normalized X and Y values in the mask file.
The following mask file produced the mask shown above:
MASK_FILE_548XX
"All Regions"
/* Region Number */ 1
/* Number of vertices */ 4
252
-12.50,
MAX
-10.00,
1.750
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Advertisement
Table of Contents
