Agilent Technologies InfiniiVision 3000 X-Series User Manual page 81

4
Math Waveforms
• t = point- to- point time difference.
• y = channel 1, 2, 3, or 4, or g(t) (internal arithmetic operation).
• co = arbitrary constant.
• i = data point index.
The integrate operator provides an Offset softkey that lets you enter a DC
offset correction factor for the input signal. Small DC offset in the
integrate function input (or even small oscilloscope calibration errors) can
cause the integrate function output to "ramp" up or down. This DC offset
correction lets you level the integrate waveform.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 81