To Save Reference Waveform Files To A Usb Storage Device; To Save Masks - Agilent Technologies InfiniiVision 3000 X-Series User Manual

4 Finally, press the Press to Save softkey.

To save reference waveform files to a USB storage device

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Save softkey.
3 In the Save Menu, press the Format softkey and turn the Entry knob to
4 Press the Source softkey and turn the Entry knob to select the source
5 Press the softkey in the second position and use the Entry knob to
6 Finally, press the Press to Save softkey.

To save masks

Mask files can be saved to one of four internal (\Agilent Flash) locations
or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Mask files have the extension MSK.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
In the File Settings Menu, you have these softkeys and options:
• Setup Info — when enabled, setup information (vertical, horizontal,
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
A message indicating whether the save was successful is displayed.
select Reference Waveform data (*.h5) .
waveform.
navigate to the save location. See
page 282.
A message indicating whether the save was successful is displayed.
Mask (*.msk).
navigate to the save location. See
page 282.
A message indicating whether the save was successful is displayed.
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"To navigate storage locations"
18
on
on
281