Phase - Agilent Technologies InfiniiVision 3000 X-Series User Manual

14
Measurements
5 Press the
Back/Up key to return to the Measurement Menu.
6 Press the Add Measurement softkey to make the measurement.
The example below shows a delay measurement between the rising edge of
channel 1 and the rising edge of channel 2.

Phase

Phase is the calculated phase shift from source 1 to source 2, expressed in
degrees. Negative phase shift values indicate that the rising edge of source
1 occurred after the rising edge of source 2.
Delay
Phase = Source 1 Period × 360
Period
Source 1
Delay
Source 2
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 233